Huawei
Controller Configuration
Connect
console and check the management IP address
System-view
If
Telnet is not enable..
Configure the wired-side Telnet service.
1. Log in to the LSW unit (wired-side) of the AC6605 through the
console port. For details,
see Logging In to the device
Through the Console Interface
.
2. Set the device name of AC6605.
<Quidway> system-view
[Quidway] sysname SwitchA
3. Configure the management IP address of AC6605.
[SwitchA] interface MEth 0/0/1
[SwitchA-MEth0/0/1] ip address 10.10.10.10 255.255.255.0
[SwitchA-MEth0/0/1] quit
4. Configure the Telnet service on AC6605:
l Set the authentication method to AAA, user name to huawei, and
password to huawei.
l Set the service type to telnet and user level to 15.
l Configure AAA authentication for the users at the vty 0 to vty 4
levels.
[SwitchA] aaa
[SwitchA-aaa] local-user huawei password simple huawei
[SwitchA-aaa] local-user huawei service-type telnet
[SwitchA-aaa] local-user huawei privilege level 15
[SwitchA-aaa] quit
[SwitchA] user-interface vty 0 4
[SwitchA-ui-vty0-4] authentication-mode aaa
[SwitchA-ui-vty0-4] return
GO
to Interface Management>vlan Management>vlan if
Create
3 vlan
100
– trunk mode
101-
office network
102-
guest network
Now
go to vlan create vlan 100,101,102
All
port hybrid
In
vlan 100 add gigport untagged 2,3 +tagged 1 port
In
vlan 101 add gigport 2 untagged
In
vlan 102 add gigport 3 untagged
Go to ethernetinterface
Gigport
1 trunk
Gigport
2 access
Gigport
3 access
Go to service set
Configure
service set with particular vlan in advanced select tunnel..
Configure
wss interface
Now go to wlan configuration and run the wizard
Now
go to ap online configuration wizard follow the self-understand option
Cheers
!!
