Huawei Controller 6605ac Basic Configuration

Huawei Controller Configuration

Connect console and check the management IP address

System-view

If Telnet is not enable..

Configure the wired-side Telnet service.

1. Log in to the LSW unit (wired-side) of the AC6605 through the console port. For details,

see Logging In to the device Through the Console Interface

.

2. Set the device name of AC6605.

<Quidway> system-view

[Quidway] sysname SwitchA

3. Configure the management IP address of AC6605.

[SwitchA] interface MEth 0/0/1

[SwitchA-MEth0/0/1] ip address 10.10.10.10 255.255.255.0

[SwitchA-MEth0/0/1] quit

4. Configure the Telnet service on AC6605:

l Set the authentication method to AAA, user name to huawei, and password to huawei.

l Set the service type to telnet and user level to 15.

l Configure AAA authentication for the users at the vty 0 to vty 4 levels.

[SwitchA] aaa

[SwitchA-aaa] local-user huawei password simple huawei

[SwitchA-aaa] local-user huawei service-type telnet

[SwitchA-aaa] local-user huawei privilege level 15

[SwitchA-aaa] quit

[SwitchA] user-interface vty 0 4

[SwitchA-ui-vty0-4] authentication-mode aaa

[SwitchA-ui-vty0-4] return

Now login to gui with admin/admin@huawei.com

GO to Interface Management>vlan Management>vlan if

Create 3 vlan

100 – trunk mode

101- office network

102- guest network

Now go to vlan create vlan 100,101,102

All port hybrid

In vlan 100 add gigport untagged 2,3 +tagged 1 port

In vlan 101 add gigport 2 untagged

In vlan 102 add gigport 3 untagged

Go to ethernetinterface

Gigport 1 trunk

Gigport 2 access

Gigport 3 access

Go to service set

Configure service set with particular vlan in advanced select tunnel..

Configure wss interface

Now go to wlan configuration and run the wizard

Now go to ap online configuration wizard follow the self-understand option

Cheers !!